ESS-GRID SINOX2
The BSLBATT ESS-GRID SINOX2 is an integrated 20ft container energy storage system for C&I facilities and microgrids. It supports grid-tied peak shaving, off-grid backup, and direct solar integration to lower electricity costs and ensure reliable power.
Exploring ESS-GRID SINOX2 System Architecture
Built on a standardized 20ft platform, the BSLBATT ESS-GRID SINOX2 integrates 314Ah LFP battery clusters, bidirectional PCS, EMS, liquid cooling, and fire suppression into one factory-tested unit. Available in 500kW/1MWh and 1MW/2MWh configurations, the system arrives pre-wired to reduce site engineering and accelerate deployment.
All-in-One Container
Integrates 8 LFP battery clusters, bidirectional PCS, EMS, and safety systems in one 20ft container. Pre-wired and tested at the factory for fast plug-and-play site installation.
Dual Cooling Design
Uses chassis-integrated cold plates for liquid cooling across all 8 battery clusters to maintain cell temperature uniformity, paired with separate air cooling for the electrical cabin.
Direct 500kW PV Input
Supports up to 500kW direct photovoltaic input with 10 or 20 MPPT strings across a 250V to 708V boost range, enabling solar self-consumption without external charge controllers.
Multi-Layer Safety
Combines combustible gas, smoke, and temperature sensors with container-level aerosol extinguishing, secondary water spray backup, and interlocked explosion exhaust ventilation.
On and Off-Grid Modes
Delivers 400V three-phase AC output with full four-quadrant operation and current THD below 3%. Supports grid-tied peak shaving, off-grid backup, and diesel generator hybrid operation.
Standard EMS Control
Equipped with RS485, Ethernet, Modbus RTU, and Modbus TCP interfaces. Built-in EMS monitors cell voltage, temperature, and SOC while connecting smoothly with third-party SCADA platforms.
Discover ESS-GRID SINOX2 Performance
























