Energipak 1000

Energipak 1000

3.2 V 1004.8 Wh 200W

It provides stable and portable power for daily life, outdoor trips, and unexpected power cuts. With a simple and practical design, it is easy to carry and use, letting you enjoy energy anytime and anywhere. BSLBATT ensures it works reliably in every situation, from short trips to home backup.

Sustainable living, BSLBATT inside

Take Power Anywhere with Energipak 1000

The Energipak 1000 portable power station uses a LiFePO4 battery and smart management system to deliver safe and steady power. Energipak 1000 is built to last, easy to recharge, and suitable for many scenarios. These advantages form the foundation for the features listed below.

Minimal Video Play Button

High‑Capacity Energy Storage

Comes with a nominal 1004.8 Wh battery capacity (≈904 Wh usable), enough to support phones, laptops, lamps, and small appliances during outdoor or emergency use.

Stable Power Output

Delivers a 200 W continuous AC output, providing steady energy for everyday electronics and light equipment, helping keep essential devices running reliably.

Lightweight and Portable

Weighs about 8.94 kg with compact dimensions (295 × 210 × 135 mm), making it easy to carry for camping, travel, or mobile work.

Fast and Flexible Charging

Supports dual 200 W inputs (AC and solar) and can fully recharge in around 5 hours, giving flexibility for on‑grid or off‑grid charging.

Multiple Output Ports

Equipped with AC, USB‑A, Type‑C, and PV ports, allowing simultaneous charging of up to four devices like phones, laptops, and cameras.

Long‑Life and Smart Protection

Built with LiFePO4 battery cells rated for more than 8000 cycles, plus a smart BMS system with multi‑layer protections (overcharge, short circuit, temperature protection), for safety and durability.

Specifications

See inside the performance of Energipak 1000

BESS Page Datasheet
Nominal Voltage
3.2 V
Nominal Capacity
1004.8 Wh
Cell & Metheod
1S1P
Usable Capacity
904.3 Wh
Rated power
200VA / 200W
Grid mode spec (input)
AC 176~264 VAC, 50/60Hz, 1.5A (max)
PV matrix MPPT spec (input)
12~36VDC,10A (max)
Inverter mode spec (Output)
Sine wave, 176VAC~230VAC ± 5% 50/60Hz
DC Output
TYPE-C: 5V/3A, 9V/2A, Max. 18W
USB-A: 5V/2A, Max. 10W
Battery Level Indicator
4 green LEDs
Charging Temperature
0~60℃
Discharging Temperature
-20~60℃
Storage Temperature
-20~45℃
Cooling Type
Air-cooled (2 Fans)
Dimensions (W × H × D)
295 × 210 × 135 mm
Weight
8.94 kg
Protection Level
IP20
Cycle Life
>8000 cycles

Downloads

Energipak 1000
Datasheet EN

Let’s Connect

Just fill out the form below. Our BSLBATT team will get back to you within 24 hours.